Yeah this is very perplexing. Here is the bridge AGS config if any would like to offer suggestions. Have tried assigning IP addys to serials no help. Everything works well when routing just cant get these bridges to function. Very simple config:
2501 S1 ---->AGS S2---AGS S3---->3102 S0 interface Serial0 no ip address no ip route-cache clockrate 125000 bridge-group 1 ! interface Serial1 no ip address no ip route-cache clockrate 125000 bridge-group 1 ! interface Serial2 no ip address no ip route-cache clockrate 125000 bridge-group 2 ! interface Serial3 no ip address no ip route-cache clockrate 125000 bridge-group 2 ! bridge crb bridge 1 protocol ieee bridge 2 protocol ieee -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of MADMAN Sent: Monday, October 01, 2001 10:02 AM To: [EMAIL PROTECTED] Subject: Re: AGS+ IOS 11 bridging [7:21515] Boy, haven't worked on an AGS in 6 years!!! If CRB is simply a software issue than it probably would work but my guess is that there may well be hardware limitions on the AGS, like the inability to do ISL encapsulation on a CAT4000. Dave Dan Faulk wrote: > > Anyone out there done much with bridging serial ports on the AGS? > The Cisco documentation says different things on the subject one source says > concurrent bridging wont work on this box others make little distinction. I > wish to bridge on the 8 serial ports and route on the 12 Ethernet ports. > Encap on the serials is not important although I will be passing IP. Cant > just try and see on this one as it will determine which cables I purchase > for my lab and money is tight. > > TIA > Dan -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21588&t=21515 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]