add no exec to line 1 8 to get to line 1, telnet 192.168.190.25 2001 if you add ip host device1 2001 192.168.198.25, then you can just telnet device1
If you get connection refused, clear line 1. you might have to do that twice to actually get the line cleared. good luck -e- ----- Original Message ----- From: "khramov" To: Sent: Wednesday, October 03, 2001 10:18 AM Subject: Re: Access Server config [7:21877] > here is the config : > ip host modem1 2001 192.168.190.25 > ip name-server 192.78.4.156 > ip name-server 192.78.4.158 > ! > interface Ethernet0 > ip address 192.168.190.25 255.255.255.0 > no ip route-cache > ! > interface Serial0 > no ip address > no ip route-cache > shutdown > ! > interface Serial1 > no ip address > no ip route-cache > shutdown > ! > interface Async1 > no ip address > async mode dedicated > no peer default ip address > ! > no ip classless > ip route 0.0.0.0 0.0.0.0 192.168.190.2 > ip route 192.168.78.0 255.255.255.0 192.168.190.2 > ! > line con 0 > line 1 8 > modem InOut > transport input all > stopbits 1 > speed 38400 > flowcontrol hardware > line 9 16 > line aux 0 > > khramov wrote: > > > We are trying to configure access server to console in to the device > > that is attached to it through async port. When we try to telnet into > > the device that attached to the router we get connection refused > > message. What should we check? > > > > [GroupStudy.com removed an attachment of type text/x-vcard which had a name > > of khramov.vcf] > > [GroupStudy.com removed an attachment of type text/x-vcard which had a name > of khramov.vcf] _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21887&t=21877 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
