If it says open then it works. Can you issue some modem commands? Try ATZ. The modem should respond with an OK. You can set the access server run at speed 2400. Is your cable correct? The modem is DCE and your access server async line is DTE.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of khramov Sent: Wednesday, October 03, 2001 2:50 PM To: [EMAIL PROTECTED] Subject: Re: Access Server config [7:21877] Nope there are no passwords, I've got it to the point where I telnet into async 1 port and it opens it up, but nothing comes on the screesn, It just says open. I think there might be a speed mismatch issue, device that is attached to it runs at 2400 and I do no think that you can set access server to run at the speed lower then 9600. So if anyone has any ideas please help. Here is the config: interface Ethernet0 ip address 192.168.190.25 255.255.255.0 no ip route-cache no ip mroute-cache ! interface Serial0 no ip address no ip route-cache no ip mroute-cache shutdown ! interface Serial1 no ip address no ip route-cache no ip mroute-cache shutdown ! interface Async1 no ip address async mode dedicated no peer default ip address ! ip default-gateway 192.168.190.2 no ip classless ip route 0.0.0.0 0.0.0.0 192.168.190.2 ip route 192.168.78.0 255.255.255.0 192.168.190.2 ! line con 0 line 1 8 no exec modem InOut transport preferred telnet transport input all stopbits 1 speed 38400 line 9 16 line aux 0 Tarak Robbana wrote: > Is there a password set on the device your telneting into? Sorry, > have to start with the small stuff. [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21949&t=21877 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
