Pardon my ignorance, but how will I load 5.1 unless I know I have enough flash to run the upgrade?
I was hoping that Cisco would have a URL where you can enter the serial number and get the factory default. Pierre-Alex -----Original Message----- From: Brad Ellis [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 03, 2001 12:06 PM To: [EMAIL PROTECTED] Subject: Re: PIX - FLASH [7:21875] Load version 5.1 and do a show ver. It will tell you how much flash you have. thanks, -Brad Ellis CCIE#5796 Network Learning Inc [EMAIL PROTECTED] used Cisco: www.optsys.net ""Pierre-Alex GUANEL"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I am trying to find out how much of flash I have on my PIX in order to > upgrade. > > I am running Version 4.07 on my PIX 520. The show version does not return > the amount of RAM. > > How can I find out my specs? > > Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21891&t=21875 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
