Are you sure you have a PIX 520? I havent heard of a PIX 520 with less than 2MB of flash before. Sounds like you might have a PIX Classic, NOT a PIX 520!
I made a similar mistake a couple years ago...I thought I had a PIX 520, but it turned out to be a PIX Classic! (Let's call it a learning experience) :) thanks, -Brad Ellis CCIE#5796 Network Learning Inc [EMAIL PROTECTED] used Cisco: www.optsys.net ""Pierre-Alex GUANEL"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > According to the table, my pix only has 512K :( > The best quote I have found for a 16M flash upgrade is $705 > Does that sound right? > > Pierre-Alex > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Brad Ellis > Sent: Wednesday, October 03, 2001 1:13 PM > To: [EMAIL PROTECTED] > Subject: Re: PIX - FLASH [7:21875] > > > 5.1 will load on 2MB or 16MB...that's why I said, 5.1! of course, that > little cisco table is probably easier! > > thanks, > -Brad Ellis > CCIE#5796 > Network Learning Inc > [EMAIL PROTECTED] > used Cisco: www.optsys.net > > ""Pierre-Alex GUANEL"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Pardon my ignorance, but how will I load 5.1 unless I know I have enough > > flash to run the upgrade? > > > > I was hoping that Cisco would have a URL where you can enter the serial > > number and get the factory default. > > > > Pierre-Alex > > > > -----Original Message----- > > From: Brad Ellis [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, October 03, 2001 12:06 PM > > To: [EMAIL PROTECTED] > > Subject: Re: PIX - FLASH [7:21875] > > > > > > Load version 5.1 and do a show ver. It will tell you how much flash you > > have. > > > > thanks, > > -Brad Ellis > > CCIE#5796 > > Network Learning Inc > > [EMAIL PROTECTED] > > used Cisco: www.optsys.net > > > > > > ""Pierre-Alex GUANEL"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > I am trying to find out how much of flash I have on my PIX in order to > > > upgrade. > > > > > > I am running Version 4.07 on my PIX 520. The show version does not > return > > > the amount of RAM. > > > > > > How can I find out my specs? > > > > > > Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22131&t=21875 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
