5.1 will load on 2MB or 16MB...that's why I said, 5.1! of course, that little cisco table is probably easier!
thanks, -Brad Ellis CCIE#5796 Network Learning Inc [EMAIL PROTECTED] used Cisco: www.optsys.net ""Pierre-Alex GUANEL"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Pardon my ignorance, but how will I load 5.1 unless I know I have enough > flash to run the upgrade? > > I was hoping that Cisco would have a URL where you can enter the serial > number and get the factory default. > > Pierre-Alex > > -----Original Message----- > From: Brad Ellis [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, October 03, 2001 12:06 PM > To: [EMAIL PROTECTED] > Subject: Re: PIX - FLASH [7:21875] > > > Load version 5.1 and do a show ver. It will tell you how much flash you > have. > > thanks, > -Brad Ellis > CCIE#5796 > Network Learning Inc > [EMAIL PROTECTED] > used Cisco: www.optsys.net > > > ""Pierre-Alex GUANEL"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I am trying to find out how much of flash I have on my PIX in order to > > upgrade. > > > > I am running Version 4.07 on my PIX 520. The show version does not return > > the amount of RAM. > > > > How can I find out my specs? > > > > Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21897&t=21875 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
