the following was taken from a working configuration. I do not have the bridging configuration handy, but I have bridged using DSL successfully.
to bridge you need to configure IRB and create a BVI that will have your public IP address. It will also be the interface for NAT outside. The DSL link will be part of the bridge-group. I also notice that you do not have your encapsulation set. I've never been clear when or where this is required, so I always throw it in there. also - your debug output is showing VPI 0 and VCI 23. is your telco of any help providing you with the proper pvc info? interface ATM0 no ip address no ip directed-broadcast no atm auto-configuration no atm ilmi-keepalive no atm address-registration no atm ilmi-enable bundle-enable hold-queue 224 in ! interface ATM0.1 point-to-point bridge-group 1 no ip directed-broadcast pvc PROVIDED BY TELCO encapsulation aal5snap ! HTH Chuck ! -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ben Hockenhull Sent: Thursday, October 18, 2001 4:20 PM To: [EMAIL PROTECTED] Subject: ADSL config [7:23456] I have an ADSL link that works fine with an ADSL bridge plugged into it. I'm trying to make it work with a 1750 and a WIC-1ADSL and can't seem to make it happen. Has anyone done this, and if so, do you have a sample working config? The cisco docs that cover bridged DSL aren't appropriate, as I wish to configure NAT on this interface, not transparently bridge between fastether0/0 and atm0/0 Relevant config from the router: interface ATM0/0 mtu 1500 no ip address atm vc-per-vp 256 no atm ilmi-keepalive bundle-enable dsl operating-mode auto ! interface ATM0/0.1 point-to-point mtu 1500 ip address 216.162.122.26 255.255.255.248 pvc valuenet 0/35 ! ! Output of a sho atm pvc: VCD / Peak Avg/Min Burst Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells Sts 0/0.1 valuenet 0 35 PVC SNAP UBR 160 UP When I try to ping the next hop address from an extended ping that specifies this interface as the soruce interface, I get the following, while debugging all sorts of atm-related parameters: Oct 18 16:41:09.288 CDT: ATM0/0.1(O): VCD:0x1 VPI:0x0 VCI:0x23 DM:0x0 SAP:AAAA CTL:03 OUI:000000 TYPE:0800 Length:0x70 Oct 18 16:41:09.288 CDT: 4500 0064 00E1 0000 FF01 153F D8A2 7A1A D8A2 7A19 0800 35FA 0D39 26F0 0000 Oct 18 16:41:09.288 CDT: 0000 2306 F120 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:09.292 CDT: ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:09.292 CDT: ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:09.292 CDT: Oct 18 16:41:09.292 CDT: Oct 18 16:41:09.292 CDT: cdlsar_safe_start: idb = 0x81E4A698, cos_queue = 0x8250F750 Oct 18 16:41:09.304 CDT: ATM0/0 RX(81E02458), size 12 [. Oct 18 16:41:11.288 CDT: ATM0/0.1(O): VCD:0x1 VPI:0x0 VCI:0x23 DM:0x0 SAP:AAAA CTL:03 OUI:000000 TYPE:0800 Length:0x70 Oct 18 16:41:11.288 CDT: 4500 0064 00E2 0000 FF01 153E D8A2 7A1A D8A2 7A19 0800 2E29 0D3A 26F0 0000 Oct 18 16:41:11.288 CDT: 0000 2306 F8F0 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:11.288 CDT: ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:11.292 CDT: ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:11.292 CDT: Oct 18 16:41:11.292 CDT: Oct 18 16:41:11.292 CDT: cdlsar_safe_start: idb = 0x81E4A698, cos_queue = 0x8250F750. Oct 18 16:41:13.288 CDT: ATM0/0.1(O): VCD:0x1 VPI:0x0 VCI:0x23 DM:0x0 SAP:AAAA CTL:03 OUI:000000 TYPE:0800 Length:0x70 Oct 18 16:41:13.288 CDT: 4500 0064 00E3 0000 FF01 153D D8A2 7A1A D8A2 7A19 0800 2658 0D3B 26F0 0000 Oct 18 16:41:13.288 CDT: 0000 2307 00C0 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:13.288 CDT: ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:13.292 CDT: ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:13.292 CDT: Oct 18 16:41:13.292 CDT: Oct 18 16:41:13.292 CDT: cdlsar_safe_start: idb = 0x81E4A698, cos_queue = 0x8250F750. Oct 18 16:41:15.288 CDT: ATM0/0.1(O): VCD:0x1 VPI:0x0 VCI:0x23 DM:0x0 SAP:AAAA CTL:03 OUI:000000 TYPE:0800 Length:0x70 Oct 18 16:41:15.288 CDT: 4500 0064 00E4 0000 FF01 153C D8A2 7A1A D8A2 7A19 0800 1E87 0D3C 26F0 0000 Oct 18 16:41:15.288 CDT: 0000 2307 0890 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:15.288 CDT: ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:15.292 CDT: ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:15.292 CDT: Oct 18 16:41:15.292 CDT: Oct 18 16:41:15.292 CDT: cdlsar_safe_start: idb = 0x81E4A698, cos_queue = 0x8250F750. Oct 18 16:41:17.288 CDT: ATM0/0.1(O): VCD:0x1 VPI:0x0 VCI:0x23 DM:0x0 SAP:AAAA CTL:03 OUI:000000 TYPE:0800 Length:0x70 Oct 18 16:41:17.288 CDT: 4500 0064 00E5 0000 FF01 153B D8A2 7A1A D8A2 7A19 0800 16B6 0D3D 26F0 0000 Oct 18 16:41:17.288 CDT: 0000 2307 1060 ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:17.288 CDT: ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:17.292 CDT: ABCD ABCD ABCD ABCD ABCD Oct 18 16:41:17.292 CDT: Oct 18 16:41:17.292 CDT: Oct 18 16:41:17.292 CDT: cdlsar_safe_start: idb = 0x81E4A698, cos_queue = 0x8250F750. Success rate is 0 percent (0/5) Any ideas? Thanks Ben Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23460&t=23456 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]