> Also, I suspect there are more of these kinds of problems with 12.x images. > My favorite is the one where you plug a cable into a port, set up your layer > three, and nothing works. All the configs are correct. A reload corrects the > situation. Starting with 12.x, the router does hardware checks, and if there > is no cable plugged into a port, the router considers that port "down". > adding a cable and layer three later gets you at best an up down situation. > I have seen it happen where you get up up but no layer three works. Reload, > and all is well. > did toggling the interface solve the problem? I used to have to do that with serials config'ed with f/r
_________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24064&t=23867 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
