I have never tried so I gave er a go and it took the command just fine:
C6509> ses 16 Trying Router-16... Connected to Router-16. Escape character is '^]'. User Access Verification Password: MSFC16>en Password: MSFC16#conf t Enter configuration commands, one per line. End with CNTL/Z. MSFC16(config)#inter vlan 50 MSFC16(config-if)#ip nat inside MSFC16(config-if)#^Z MSFC16# Dave "Thomas N." wrote: > > Anyone have any problem turning on VLAN interfaces that are running on NAT > protocol? I couldn't turn VLAN on my 6509 that has "ip nat inside" > statement. Thanks! > > Thomas N. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24655&t=24595 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]