show int | include FastE|Description i usually wind up entering
show int | include line|Description|Internet this feature is the reason i find any excuse at all to avoid working with routers bearing 11.x IOS. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/cliparse.htm "Ole Drews Jensen" @groupstudy.com on 11/15/2001 06:10:43 PM Please respond to "Ole Drews Jensen" Sent by: [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: (bcc: Kevin Cullimore) Subject: show int | include ... [7:26422] I wanted to play around with the | include option on the show command, but I can't get it to do what I want, and I can't find any docs on it. I want to include the interface and description of all FastEthernet interfaces. If I do a show int | include FastEthernet it will show the line where it says FastEthernet for all FastEthernet interfaces. Example: SANTA#show int | include FastEthernet FastEthernet0/1 is up, line protocol is up FastEthernet0/2 is up, line protocol is up FastEthernet0/3 is down, line protocol is down FastEthernet0/4 is down, line protocol is down FastEthernet0/5 is down, line protocol is down FastEthernet0/6 is up, line protocol is up FastEthernet0/7 is up, line protocol is up FastEthernet0/8 is up, line protocol is up FastEthernet0/9 is up, line protocol is up FastEthernet0/10 is down, line protocol is down FastEthernet0/11 is down, line protocol is down FastEthernet0/12 is up, line protocol is up If I do a show int | include Description it will show the line where there is a description for all interfaces. Example: SANTA#show int | include Description Description: LINK TO SWITCH IN SUITE 1209 Description: LINK TO HUB IN SUITE 1303 Description: HP LaserJet 4 Plus Description: HP DeskJet 930C Description: FIREWALL Description: Dave Description: Cindy Description: Lauren Description: Sharon But, how do I get both? I have tried the following with out luck: show int | include FastEthernet Description show int | include FastEthernet , Description show int | include FastEthernet | Description show int | include FastEthernet | include Description show int | include FastEthernet include Description This is one of those stupid command options you've seen so many times, but never used. Any comments? Thanks in advance, Ole ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.RouterChief.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ================================================================ This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26426&t=26422 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]