Please post your config ""Russell Lusignan"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Yup, hostname and domain are configured, and show ca mypubkey shows the key, > sorry, should have included that in the original post. Let me know if you > have any other ideas :) > > -Russ > > > ""Patrick Bass"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > did you configure a hostname and a domain-name? > > do a "show ca mypubkey rsa" from config mode to verify you have a key > > also reissue "ssh 0 0 outside" > > > > if it doesn't work, pls post config > > > > ""Russell Lusignan"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hey group, > > > > > > I have a PIX 525 in failover that I am trying to get SSH enabled on. I > > have > > > done: > > > > > > password > > > ca generate rsa key 1024 > > > ssh outside > > > ca save all > > > > > > SSH doesn't respond in any way to my client (tried several). Debug SSH > > > shows nothing, and Debug IP packet shows my client IP trying to > establish > > a > > > session on port 22 with the PIX, yet the PIX doesn't respond. The 525s > > are > > > working correctly (passing traffic etc.. ) > > > > > > Another set of 525's SSH config work fine, can't think of what I am > > missing > > > here. > > > > > > Anyone have any ideas? > > > > > > -Russ
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26509&t=26502 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
