0.0.0.0 0.0.0.0 specifies all ... but I have done x.x.x.x 255.255.255.255
outside and it still doesn't work.


""Hansraj Patil""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Don't to have specify client IP address in ssh command...?
>
> ssh (IP address & netmask) oustside
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Russell Lusignan
> Sent: Friday, November 16, 2001 9:46 AM
> To: [EMAIL PROTECTED]
> Subject: Re: PIX 6.1(1) SSH to outside [7:26502]
>
>
> Yup, hostname and domain are configured, and show ca mypubkey shows the
key,
> sorry, should have included that in the original post.  Let me know if you
> have any other ideas :)
>
> -Russ
>
>
> ""Patrick Bass""  wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > did you configure a hostname and a domain-name?
> > do a "show ca mypubkey rsa" from config mode to verify you have a key
> > also reissue "ssh 0 0 outside"
> >
> > if it doesn't work, pls post config
> >
> > ""Russell Lusignan""  wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hey group,
> > >
> > > I have a PIX 525 in failover that I am trying to get SSH enabled on.
I
> > have
> > > done:
> > >
> > > password
> > > ca generate rsa key 1024
> > > ssh  outside
> > > ca save all
> > >
> > > SSH doesn't respond in any way to my client (tried several).  Debug
SSH
> > > shows nothing, and Debug IP packet shows my client IP trying to
> establish
> > a
> > > session on port 22 with the PIX, yet the PIX doesn't respond.  The
525s
> > are
> > > working correctly (passing traffic etc.. )
> > >
> > > Another set of 525's SSH config work fine, can't think of what I am
> > missing
> > > here.
> > >
> > > Anyone have any ideas?
> > >
> > > -Russ




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26513&t=26502
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to