For example ssh 1.1.1.1 255.255.255.255 outside
That should do it. -Jake -----Original Message----- From: Hansraj Patil [mailto:[EMAIL PROTECTED]] Sent: Friday, November 16, 2001 12:21 PM To: [EMAIL PROTECTED] Subject: RE: PIX 6.1(1) SSH to outside [7:26502] Don't to have specify client IP address in ssh command...? ssh (IP address & netmask) oustside -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Russell Lusignan Sent: Friday, November 16, 2001 9:46 AM To: [EMAIL PROTECTED] Subject: Re: PIX 6.1(1) SSH to outside [7:26502] Yup, hostname and domain are configured, and show ca mypubkey shows the key, sorry, should have included that in the original post. Let me know if you have any other ideas :) -Russ ""Patrick Bass"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > did you configure a hostname and a domain-name? > do a "show ca mypubkey rsa" from config mode to verify you have a key > also reissue "ssh 0 0 outside" > > if it doesn't work, pls post config > > ""Russell Lusignan"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hey group, > > > > I have a PIX 525 in failover that I am trying to get SSH enabled on. > > I > have > > done: > > > > password > > ca generate rsa key 1024 > > ssh outside > > ca save all > > > > SSH doesn't respond in any way to my client (tried several). Debug > > SSH shows nothing, and Debug IP packet shows my client IP trying to establish > a > > session on port 22 with the PIX, yet the PIX doesn't respond. The > > 525s > are > > working correctly (passing traffic etc.. ) > > > > Another set of 525's SSH config work fine, can't think of what I am > missing > > here. > > > > Anyone have any ideas? > > > > -Russ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26515&t=26502 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
