Go ahead and try it. ATM modules certainly works with the NP-6E. Do they specify what the issue is? Processor? Shared card SIMM (that 4MB jobbie under the modules)? Heat? I seem to remember that there is a preferred slot for the card with the greatest throughput. Just can't remember which one. I'll guess at the one closest to the power supply. Let us know the outcome.
> -----Original Message----- > From: Circusnuts [mailto:[EMAIL PROTECTED]] > Sent: Monday, November 19, 2001 8:24 PM > To: [EMAIL PROTECTED] > Subject: 45 & 4700's, FE, & ATM [7:26788] > > > I found on the CCO where it is not recommended not to run FE > and ATM modules > on the same 45 or 4700 router. I have a 4500 and 4500M, both > running NP-4Ts, > NP-1FE, and NP-1R & NP-2R modules. Has anyone had experience > with running > ATM > and FE on the same router ??? Cisco says it's a big no-go, > but it's only > with > home lab scenarios. > > Any advice ??? Fortunately or unfortunately, the OC3 modules > are in the mail > as we speak. > > Thanks > Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26794&t=26788 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
