Hi, It would be helpful if you can post the CCO URL(s) that advise not to use those modules on such routers.
I know the platform is different to the ones you are using, but I am currently using ATM and FE ports on Cisco 3660 routers and haven't seen a single problem. Although it is only on a LAB scenario, both ports have been working flawlessly. The router has one ATM card with dual OC3 ports, the FE port is buil-in on the Processor card, 4 ports Serial interface module and a single HSSI port module. IOS running is 12.0(7)T. Hth, Angel Angel Leiva - MCSE, CCNA, CCNP-WAN -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Circusnuts Sent: Monday, November 19, 2001 8:24 PM To: [EMAIL PROTECTED] Subject: 45 & 4700's, FE, & ATM [7:26788] I found on the CCO where it is not recommended not to run FE and ATM modules on the same 45 or 4700 router. I have a 4500 and 4500M, both running NP-4Ts, NP-1FE, and NP-1R & NP-2R modules. Has anyone had experience with running ATM and FE on the same router ??? Cisco says it's a big no-go, but it's only with home lab scenarios. Any advice ??? Fortunately or unfortunately, the OC3 modules are in the mail as we speak. Thanks Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26806&t=26788 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
