What is interesting to me is how I read the question as opposed to others.
My understanding was that he wanted to run FDDI end to end over thin or
thick coax. The layer two protocol was FDDI. At question was the
acceptability of the media.

> -----Original Message-----
> From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
> Sent: Monday, November 26, 2001 3:04 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Can 10Base2/5 be connected with FDDI ? [7:27352]
> 
> 
> At 03:16 PM 11/26/01, Daniel Cotts wrote:
> >See the following URL for a high level overview of FDDI. It 
> states that
> >there is a copper twisted pair medium allowed.
> 
> That might solve the physical-layer connectivity problem, but 
> you would 
> still have a problem with signal encoding, framing, media 
> access control, 
> frame sizes, etc. They are two different technologies. To 
> connect them, you 
> need a bridge, switch, or router that has both an Ethernet 
> and an FDDI 
> connector. You might be able to find a low-cost bridge that 
> does this on 
> E-Bay (or maybe a new one at BlackBox or some such vendor). FDDI also 
> requires a concentrator.
> 
> If the goal is to learn FDDI for CCIE tests, maybe books are 
> best!? ;-)
> 
> Priscilla
> 
> 
> >I'd suggest a search on
> >google to define exactly what the spec states.
> >http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/fddi.htm
> >
> > > -----Original Message-----
> > > From: Charles Mao [mailto:[EMAIL PROTECTED]]
> > > Sent: Monday, November 26, 2001 12:26 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: Can 10Base2/5 be connected with FDDI ? [7:27352]
> > >
> > >
> > > Can 10Base2/5 be connected with FDDI ? If yes, how ?
> > > If no, why ? Thank you.
> ________________________
> 
> Priscilla Oppenheimer
> http://www.priscilla.com




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27393&t=27352
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to