I have the following configuration on my router: radius-server host auth-port 1812 acct-port 1813 radius-server retransmit 3 radius-server timeout 20 radius-server key !
I have configured IAS with my router as the client and the Client-Vendor as Cisco The shared secret is the same as the radius-server When I telnet to the router, after having entered a valid username and password, I get the message "%authentication failed". I have turned on radius debugging on the router but I don't see anything. Did I miss something obvious? Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27554&t=27554 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]