I don't think your showing everything. Did you not define the addres of your host. You must have some aaa commands or you wouldn't be able to confgiure radius-server stuff.
Dave "Pierre-Alex J. Guanel" wrote: > > I have the following configuration on my router: > > radius-server host auth-port 1812 acct-port 1813 > radius-server retransmit 3 > radius-server timeout 20 > radius-server key > ! > > I have configured IAS with my router as the client and the Client-Vendor as > Cisco > > The shared secret is the same as the radius-server > > When I telnet to the router, after having entered a valid username and > password, > > I get the message "%authentication failed". > > I have turned on radius debugging on the router but I don't see anything. > > Did I miss something obvious? > > Pierre-Alex -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27562&t=27554 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
