And from Router D, I can ping back to A, but not to B: RouterD#ping 10.1.1.100
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.100, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 84/86/88 ms RouterD#ping 192.168.1.17 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.17, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) RouterD# ""Hunt Lee"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I already had the default-metric statment on the ASBR (Router C for IGRP > process), I tried to add this to Router D (IGRP process), with no help. > These are the routing table outputs and trace routes outputs from the > routers: > > Any ideas?? > > Thanks. > Hunt > > > RouterA#show ip route > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate > default > > Gateway of last resort is not set > > 10.0.0.0 255.255.255.0 is subnetted, 1 subnets > C 10.1.1.0 is directly connected, Serial1 > 192.168.1.0 255.255.255.240 is subnetted, 1 subnets > O IA 192.168.1.16 [110/128] via 10.1.1.1, 00:07:03, Serial1 > 192.168.2.0 255.255.255.240 is subnetted, 1 subnets > O E2 192.168.2.48 [110/20] via 10.1.1.1, 00:07:03, Serial1 > RouterA# > > > RouterB#show ip route > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate > default > > Gateway of last resort is not set > > 10.0.0.0 255.255.255.0 is subnetted, 1 subnets > C 10.1.1.0 is directly connected, Serial1 > 192.168.1.0 255.255.255.240 is subnetted, 1 subnets > C 192.168.1.16 is directly connected, Serial0 > 192.168.2.0 255.255.255.240 is subnetted, 1 subnets > O E2 192.168.2.48 [110/20] via 192.168.1.18, 00:07:45, Serial0 > RouterB# > > > RouterC#show ip route > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate > default > U - per-user static route, o - ODR > > Gateway of last resort is not set > > 10.0.0.0/24 is subnetted, 1 subnets > O IA 10.1.1.0 [110/128] via 192.168.1.17, 00:09:58, Serial0 > 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks > S 192.168.1.0/24 is directly connected, Null0 > C 192.168.1.16/28 is directly connected, Serial0 > 192.168.2.0/28 is subnetted, 1 subnets > C 192.168.2.48 is directly connected, Serial1 > RouterC# > > RouterD#show ip route > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter > area > * - candidate default, U - per-user static route, o - ODR > P - periodic downloaded static route > > Gateway of last resort is not set > > I 10.0.0.0/8 [100/8576] via 192.168.2.49, 00:00:58, Serial0 > 192.168.2.0/28 is subnetted, 1 subnets > C 192.168.2.48 is directly connected, Serial0 > RouterD# > > > And when I ping from Router A to D, it works.. but it doesn't work from B to > D (& vice versa) > > RouterA#ping 192.168.2.50 > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 192.168.2.50, timeout is 2 seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip min/avg/max = 84/86/88 ms > RouterA# > > RouterB#ping 192.168.2.50 > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 192.168.2.50, timeout is 2 seconds: > ..... > Success rate is 0 percent (0/5) > RouterB# > > > And here's what I got from OSPF topology table: > > RouterA#show ip ospf database > > OSPF Router with ID (10.1.1.100) (Process ID 100) > > > Router Link States (Area 1) > > Link ID ADV Router Age Seq# Checksum Link count > 10.1.1.100 10.1.1.100 878 0x80000004 0x4E4 2 > 192.168.1.17 192.168.1.17 822 0x8000000F 0xEE46 2 > > Summary Net Link States (Area 1) > > Link ID ADV Router Age Seq# Checksum > 192.168.1.16 192.168.1.17 812 0x80000001 0xBC79 > > Summary ASB Link States (Area 1) > > Link ID ADV Router Age Seq# Checksum > 192.168.2.49 192.168.1.17 802 0x80000001 0xB251 > > AS External Link States > > Link ID ADV Router Age Seq# Checksum Tag > 192.168.2.48 192.168.1.49 1190 0x80000002 0xA7CF 0 > 192.168.2.48 192.168.2.49 829 0x80000001 0xA2D4 0 > RouterA# > > > RouterB#show ip ospf database > > OSPF Router with ID (192.168.1.17) (Process ID 100) > > > Router Link States (Area 0) > > Link ID ADV Router Age Seq# Checksum Link count > 192.168.1.17 192.168.1.17 862 0x80000015 0x41F3 2 > 192.168.1.49 192.168.1.49 2020 0x80000004 0x49BA 2 > 192.168.2.49 192.168.2.49 864 0x80000002 0x38CC 2 > > Summary Net Link States (Area 0) > > Link ID ADV Router Age Seq# Checksum > 10.1.1.0 192.168.1.17 869 0x80000005 0xD2BE > > Router Link States (Area 1) > > Link ID ADV Router Age Seq# Checksum Link count > 10.1.1.100 10.1.1.100 928 0x80000004 0x4E4 2 > 192.168.1.17 192.168.1.17 870 0x8000000F 0xEE46 2 > > Summary Net Link States (Area 1) > > Link ID ADV Router Age Seq# Checksum > 192.168.1.16 192.168.1.17 860 0x80000001 0xBC79 > > Summary ASB Link States (Area 1) > > Link ID ADV Router Age Seq# Checksum > 192.168.2.49 192.168.1.17 851 0x80000001 0xB251 > > AS External Link States > > Link ID ADV Router Age Seq# Checksum Tag > 192.168.2.48 192.168.1.49 1239 0x80000002 0xA7CF 0 > 192.168.2.48 192.168.2.49 876 0x80000001 0xA2D4 0 > RouterB# > > > RouterA#trace 192.168.2.50 > > Type escape sequence to abort. > Tracing the route to RouterD (192.168.2.50) > > 1 10.1.1.1 16 msec 16 msec 16 msec > 2 RouterC (192.168.1.18) 32 msec 28 msec 32 msec > 3 RouterD (192.168.2.50) 44 msec * 40 msec > RouterA# > > > RouterB#trace 192.168.2.50 > > Type escape sequence to abort. > Tracing the route to RouterD (192.168.2.50) > > 1 RouterC (192.168.1.18) 16 msec 12 msec 16 msec > 2 * * * > 3 * * * > 4 > RouterB# > > > > > ""Stefan Dozier"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Well since I need the redistribution practice, figured > > I'd plug your config into my pod and see if I could figure > > out what gives! > > > > First thing I noticed...and it may just be a typo or dyslexia > > (it's an affliction I experience often (smile))if you didn't > > cut and paste your configs. > > From your post... > > > > A is connected to B with 10.1.1.100 / 24 - Serial 0 > > > > B is connected to A with 10.1.1.1 / 24 - Serial 0 > > B is connected to C with 192.168.1.17 /28 - Serial 1 > > > > doesn't coincide with your posted configs > > > > hostname RouterA > > ! > > interface Serial1 > > ip address 10.1.1.100 255.255.255.0 > > clockrate 64000 > > > > hostname RouterB > > ! > > interface Serial0 > > ip address 192.168.1.17 255.255.255.240 > > no fair-queue > > ! > > interface Serial1 > > ip address 10.1.1.1 255.255.255.0 > > > > Second...Here's my plugged in config and all devices have > > connectivity to all other devices as expected. > > > > Caveat: only the necessary portions of the config are listed > > for brevity and I changed some DTE/DCE interfaces and increased > > the clockrate (personal preferrence)! > > > > hostname RouterA > > ! > > interface Serial0 > > ip address 10.1.1.100 255.255.255.0 > > no fair-queue > > ! > > router ospf 100 > > network 10.1.1.100 0.0.0.0 area 1 > > ! > > end > > ! > > hostname RouterB > > ! > > interface Serial0 > > ip address 10.1.1.1 255.255.255.0 > > no fair-queue > > clockrate 4000000 > > ! > > interface Serial1 > > ip address 192.168.1.17 255.255.255.240 > > ! > > router ospf 100 > > network 192.168.1.17 0.0.0.0 area 0 > > network 10.1.1.1 0.0.0.0 area 1 > > ! > > end > > ! > > hostname RouterC > > ! > > interface Serial0 > > ip address 192.168.1.18 255.255.255.240 > > no fair-queue > > clockrate 4000000 > > ! > > interface Serial1 > > ip address 192.168.2.49 255.255.255.240 > > clockrate 4000000 > > ! > > router ospf 100 > > redistribute igrp 200 metric-type 1 subnets > > network 192.168.1.18 0.0.0.0 area 0 > > default-metric 10 > > ! > > router igrp 200 > > redistribute ospf 100 > > network 192.168.2.0 > > default-metric 10000 100 255 1 1500 > > ! > > ip route 192.168.1.0 255.255.255.0 Null0 > > ! > > end > > ! > > hostname RouterD > > ! > > interface Serial0 > > ip address 192.168.2.50 255.255.255.240 > > no fair-queue > > ! > > router igrp 200 > > network 192.168.2.0 > > ! > > end > > > > HTH > > > > Stefan > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Hunt Lee > > Sent: Friday, December 07, 2001 2:35 AM > > To: [EMAIL PROTECTED] > > Subject: Redistribution Question [7:28374] > > > > > > I need some help on a Redistribution question: > > > > I have setup 4 routers: > > > > Router A - Router B - Router C - Router D > > > > A, B & C are running OSPF, and C & D are running IGRP - I'm trying to > > redistribute between OSPF & IGRP routes: > > > > A is connected to B with 10.1.1.100 / 24 - Serial 0 > > > > B is connected to A with 10.1.1.1 / 24 - Serial 0 > > B is connected to C with 192.168.1.17 /28 - Serial 1 > > > > C is connected to B with 192.168.1.18 / 28 - Serial 0 > > C is connected to D with 192.168.2.49 / 28 - Serial 1 > > > > D is connected to C with 192.168.2.50 / 28 - Serial 0 > > > > However, I could only ping from D to A (& vice versa), but I couldn't ping > > from B to D, or D to B > > N.B: D to C (and vice versa) is fine as they are directly connected > > > > Any help will be greatly appreciated. > > > > Thanks in advance, > > > > Hunt Lee > > > > > > Below are the configs for the routers: > > > > Router A > > version 11.0 > > > > service udp-small-servers > > > > service tcp-small-servers > > > > ! > > > > hostname RouterA > > > > ! > > > > ! > > > > no ip domain-lookup > > > > ! > > > > interface Ethernet0 > > > > no ip address > > > > shutdown > > > > ! > > > > interface Serial0 > > > > no ip address > > > > no fair-queue > > > > clockrate 64000 > > > > ! > > > > interface Serial1 > > > > ip address 10.1.1.100 255.255.255.0 > > > > clockrate 64000 > > > > ! > > > > router ospf 100 > > > > network 10.1.1.100 0.0.0.0 area 1 > > > > ! > > > > ip host RouterB 10.1.1.1 > > > > ip host RouterC 192.168.1.18 > > > > ip host RouterD 192.168.2.50 > > > > ! > > > > line con 0 > > > > line aux 0 > > > > transport input all > > > > line vty 0 4 > > > > login > > > > ! > > > > end > > > > > > Router B > > version 11.0 > > > > service udp-small-servers > > > > service tcp-small-servers > > > > ! > > > > hostname RouterB > > > > ! > > > > no ip domain-lookup > > > > ! > > > > interface Ethernet0 > > > > no ip address > > > > shutdown > > > > ! > > > > interface Serial0 > > > > ip address 192.168.1.17 255.255.255.240 > > > > no fair-queue > > > > ! > > > > interface Serial1 > > > > ip address 10.1.1.1 255.255.255.0 > > > > ! > > > > router ospf 100 > > > > network 192.168.1.17 0.0.0.0 area 0 > > > > network 10.1.1.1 0.0.0.0 area 1 > > > > ! > > > > ip host RouterA 10.1.1.100 > > > > ip host RouterC 192.168.1.18 > > > > ip host RouterD 192.168.2.50 > > > > ! > > > > line con 0 > > > > line aux 0 > > > > transport input all > > > > line vty 0 4 > > > > login > > > > ! > > > > end > > > > > > > > Router C > > > > version 12.0 > > > > service timestamps debug uptime > > > > service timestamps log uptime > > > > no service password-encryption > > > > ! > > > > hostname RouterC > > > > ! > > > > ! > > > > ip subnet-zero > > > > no ip domain-lookup > > > > ip host RouterA 10.1.1.100 > > > > ip host RouterB 192.168.1.17 > > > > ip host RouterD 192.168.2.50 > > > > > > > > ! > > > > interface Ethernet0 > > > > no ip address > > > > no ip directed-broadcast > > > > shutdown > > > > ! > > > > interface Serial0 > > > > ip address 192.168.1.18 255.255.255.240 > > > > no ip directed-broadcast > > > > no ip mroute-cache > > > > no fair-queue > > > > clockrate 64000 > > > > ! > > > > interface Serial1 > > > > ip address 192.168.2.49 255.255.255.240 > > > > no ip directed-broadcast > > > > clockrate 64000 > > > > ! > > > > interface BRI0 > > > > no ip address > > > > no ip directed-broadcast > > > > shutdown > > > > ! > > > > router ospf 100 > > > > redistribute igrp 200 metric-type 1 subnets > > > > network 192.168.1.18 0.0.0.0 area 0 > > > > default-metric 10 > > > > ! > > > > router igrp 200 > > > > redistribute ospf 100 > > > > network 192.168.2.0 > > > > default-metric 10000 100 255 1 1500 > > > > ! > > > > ip classless > > > > ip route 192.168.1.0 255.255.255.0 Null0 > > > > ! > > > > line con 0 > > > > transport input none > > > > line aux 0 > > > > line vty 0 4 > > > > login > > > > ! > > > > end > > > > > > > > Router D > > > > version 12.1 > > > > service timestamps debug uptime > > > > service timestamps log uptime > > > > no service password-encryption > > > > ! > > > > hostname RouterD > > > > !! > > > > ip subnet-zero > > > > no ip finger > > > > no ip domain-lookup > > > > ip host RouterC 192.168.1.49 > > > > ip host RouterB 192.168.1.17 > > > > ip host RouterA 10.1.1.100 > > > > ! > > > > interface Ethernet0 > > > > no ip address > > > > shutdown > > > > ! > > > > interface Serial0 > > > > ip address 192.168.2.50 255.255.255.240 > > > > no fair-queue > > > > ! > > > > interface Serial1 > > > > no ip address > > > > shutdown > > > > ! > > > > router igrp 200 > > > > network 192.168.2.0 > > > > ! > > > > ip classless > > > > ip http server > > > > ! > > > > line con 0 > > > > exec-timeout 0 0 > > > > transport input none > > > > line 1 16 > > > > line aux 0 > > > > line vty 0 4 > > > > login > > > > ! > > > > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28495&t=28374 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
