maybe there is a route round,paste your config or sh ip route result! > Anyone have an ideas on this half successfull ping across two directly > connect serial interfaces? Clock rate, encapsulation, controllers and cables > look OK. Address on R4 is 172.16.1.4/24 and R2 is 172.16.1.5/24 . Here is > the ping from R4 > R4#ping 172.16.1.5 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 172.16.1.5, timeout is 2 seconds: > .!.!. > Success rate is 40 percent (2/5), round-trip min/avg/max = 32/32/32 ms > > Same thing from R2 to R4 > R2#ping 172.16.1.4 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 172.16.1.4, timeout is 2 seconds: > !.!.! > Success rate is 60 percent (3/5), round-trip min/avg/max = 28/30/32 ms > Thanks > Randy
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30453&t=30449 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
