The problem is fixed. Must have been some type of routing issue with those addresses. I changed the addresses and getting 100% success on the pings. Thanks to all for there suggestions. 22:06:13: %SYS-5-CONFIG_I: Configured from console by console R2#ping 192.168.1.1
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 40/41/44 ms R2# 22:06:21: IP: s=192.168.1.2 (local), d=192.168.1.1 (Serial1), len 100, sending 22:06:21: IP: s=192.168.1.1 (Serial1), d=192.168.1.2 (Serial1), len 100, rcvd 3 22:06:21: IP: s=192.168.1.2 (local), d=192.168.1.1 (Serial1), len 100, sending 22:06:21: IP: s=192.168.1.1 (Serial1), d=192.168.1.2 (Serial1), len 100, rcvd 3 22:06:21: IP: s=192.168.1.2 (local), d=192.168.1.1 (Serial1), len 100, sending 22:06:21: IP: s=192.168.1.1 (Serial1), d=192.168.1.2 (Serial1), len 100, rcvd 3 22:06:21: IP: s=192.168.1.2 (local), d=192.168.1.1 (Serial1), len 100, sending 22:06:21: IP: s=192.168.1.1 (Serial1), d=192.168.1.2 (Serial1), len 100, rcvd 3 R2# 22:06:21: IP: s=192.168.1.2 (local), d=192.168.1.1 (Serial1), len 100, sending 22:06:21: IP: s=192.168.1.1 (Serial1), d=192.168.1.2 (Serial1), len 100, rcvd 3 R2# pod1-termserv#4 [Resuming connection 4 to r4 ... ] R4#ping 192.168.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30486&t=30449 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]