The Catalyst 1900 doesn't call it SPAN but you can do the same functionality with the "monitor-port" command. You should first enter the command to enable the monitoring feature and then configure two parameters - the port where the analyzer resides and the ports that will be monitored.
Good luck! Priscilla At 09:49 PM 1/2/02, Chong Chun Wei (Central) wrote: >Dear all, > >Is is possible to set SPAN on a catalyst 1900? If yes, how? >Thankyou. > >Cheers, >Alvin Chong >IT-NCS >Mobile: 016- 3304503 >Fixed: 03 - 7211595 ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30749&t=30746 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
