As soon as you turn on single-router-mode, it will sync up the redundant MFSC on that switch automatically. Of course this will need to be performed on every switch that has redundant MFSC's installed. There are also a few things that have to be checked first i.e. both MSFC's are running Cisco IOS release 12.1(8a)E2 or later, stuff like that. That link I sent earlier explains what needs to take place pretty well.
Woody -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Friday, January 04, 2002 9:41 AM To: Woods, Randall, SOBUS Subject: RE: MSFC [7:30668] Well I does have two switches. And they both have two MSFC's. So my question was should the MSFC's have the same config or will it be copy automaticaly. On Fri, 04 January 2002, "Woods, Randall, SOBUS" wrote: > > Scottie, > This is another option you can try. Single Router Mode (SRM). It > will migrate the configs of the primary MSFC to the back-up just like > the Supervisor Module does when it fails. We are in the process of > testing this feature out at my company. > > http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg > _gd/redund.htm#xtocid1228929 > > hope this helps > Woody > > -----Original Message----- > From: Scottie @ PacBell [mailto:[EMAIL PROTECTED]] > Sent: Thursday, January 03, 2002 9:53 PM > To: [EMAIL PROTECTED] > Subject: Re: MSFC [7:30668] > > > Depending on your topology. If you have only one Cat, I would > definitely > configure it as two separate routers. However if you have two Cats each > with dual MSFCs then I would configure them as Active and Standby. With > the > first scenario mentioned above it gives you redundant routing > capabilities > immediately whereas the second option takes a few seconds to kick in. > ----- Original Message ----- > From: > To: > Sent: Wednesday, January 02, 2002 5:51 AM > Subject: MSFC [7:30668] > > > > I have a 6509 switch with 2 MSFC's. I would like to know if I can or > should > > I have the same config on both MSFC's. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30927&t=30668 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
