try ppp pap sent-username... Dave
bergenpeak wrote: > > "sent-username" is not an option for me under ppp chap. My > options at "ppp chap" are "hostname", "password", "wait", and > "refuse". > > Thanks > > "McCallum, Robert" wrote: > > > > what about ppp chap sent-username ? > > > > -----Original Message----- > > From: bergenpeak [mailto:[EMAIL PROTECTED]] > > Sent: 07 January 2002 13:09 > > To: [EMAIL PROTECTED] > > Subject: PPP link negotiation problem [7:31132] > > > > I'm working through the different ways one can configure CHAP > > authentication between two routers over a PPP serial link. > > > > If I configure ppp encap and ppp chap authentication and both sides > > of the link and use the global: > > > > username password > > > > for identification, the link comes up and IPCP is established. The > > routers have hostnames defined to be "rtr-2505" and "rtr-2514". > > > > When I try to use the "simpler" CHAP config, where one can encode > > in the interface directly the same hostname and password, I see > > the error: > > > > PPP Serial0: Using alternative CHAP hostname something > > PPP Serial0: CHAP Challenge id=14 received from something > > PPP Serial0: ignoring challenge with local name > > > > On both rtrs I have the following defined on the serial interface: > > ppp encap > > ppp authentication chap > > ppp chap hostname something > > ppp chap password else > > > > there are no usernames defined globally. > > > > Ideas? > > > > Thanks -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31277&t=31132 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
