I apologize - I did not read the question word by word. If you only make changes to the CIR, there will be no changes necessary.
Ole ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.RouterChief.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 09, 2002 10:54 AM To: [EMAIL PROTECTED] Subject: Re: Frame-Relay Question [7:31395] Only if you adding channels to a frac T1 but nothing for a CIR change. Dave James wrote: > > Hello, > > This might be a simple/rehashed question. I appreciate > any feedback from anyone who can comment on this.. > If you were to order a higher guaranteed rate /port > speed on an existing frame-relay connection, for > example a t1 frame-relay, will there be any > configurations needed on the router or CSU ? Assuming > straight on Frame-Relay config. Any info is greatly > appreciated.. > > Thanks > > __________________________________________________ > Do You Yahoo!? > Send FREE video emails in Yahoo! Mail! > http://promo.yahoo.com/videomail/ -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31419&t=31395 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]