By default all outbound connections are enabled and all inbound are blocked.
----- Original Message ----- From: "Philip Sousa" To: Sent: Wednesday, January 09, 2002 12:32 AM Subject: PIX with no NAT [7:31353] > I've been on Cisco's site for hours, but cannot find a conclusive answer to > my question. When you disable NAT (NAT 0) to allow the use of public IP's > behind the PIX, are the internal nodes allowed to start outbound connections > by default?? I need to selectively allow nodes behind the firewall to start > outbound connections on certain port....how should I accomplish this? > Access-lists? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31633&t=31353 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]