> ----- Original Message ----- > From: "Philip Sousa" > Sent: Wednesday, January 09, 2002 12:32 AM > Subject: PIX with no NAT [7:31353] > > I've been on Cisco's site for hours, but cannot find a conclusive answer to > my question. When you disable NAT (NAT 0) to allow the use of public IP's > behind the PIX, are the internal nodes allowed to start outbound connections > by default?? I need to selectively allow nodes behind the firewall to start > outbound connections on certain port....how should I accomplish this? > Access-lists?
nat (inside) 0 access-list only-the-lucky-one access-list only-the-lucky-one permit tcp/udp/..... Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31636&t=31353 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
