By the way, the old timers used to say NIC Center. (Network Information Center Center)
Priscilla At 10:54 AM 1/12/02, Jeff Buehler wrote: >or BERT Test > > >""Allen May"" wrote in message >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Yep...and PIN Number, ACL List, etc. I used to bug instructors by >referring > > to them as Network Interface Card Card's to point out what NIC Card really > > was ;) > > > > Allen > > ----- Original Message ----- > > From: "Patrick Ramsey" > > To: > > Sent: Friday, January 11, 2002 11:54 AM > > Subject: RE: full-duplex Ethernet cable? [7:31643] > > > > > > > Is NIC Card kinda like a FAT Table? : p > > > > > > >>> "Daniel Cotts" 01/11/02 12:34PM >>> > > > Unshielded Twisted Pair (UTP) uses two pair (four wires) on pins 1&2 and > > 3&6 > > > of an RJ-45 plug. Whether it runs as full or half duplex is determined >by > > > the connected equipment - NIC card, Hub, Switch, router, etc. > > > If Ethernet is running over coax cable then it is limited to half >duplex. > > > > > > > -----Original Message----- > > > > From: mlh [mailto:[EMAIL PROTECTED]] > > > > Sent: Friday, January 11, 2002 10:56 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: full-duplex Ethernet cable? [7:31643] > > > > > > > > > > > > Hi, there, > > > > > > > > > > > > how many pairs of two-twisted cable are used for full-duplex > > > > Ethernet ? what > > > > is the > > > > difference between full- and half- duplex cable? > > > > > > > > Thank you in advance. > > > > > > > > > > > > > > > > Regrads, > > > > > > > > mlh ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31736&t=31643 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
