Yes, or TCP/IP Protocol for that matter. -----Original Message----- From: Patrick Ramsey [mailto:[EMAIL PROTECTED]] Sent: Friday, January 11, 2002 11:54 AM To: [EMAIL PROTECTED] Subject: RE: full-duplex Ethernet cable? [7:31643]
Is NIC Card kinda like a FAT Table? : p >>> "Daniel Cotts" 01/11/02 12:34PM >>> Unshielded Twisted Pair (UTP) uses two pair (four wires) on pins 1&2 and 3&6 of an RJ-45 plug. Whether it runs as full or half duplex is determined by the connected equipment - NIC card, Hub, Switch, router, etc. If Ethernet is running over coax cable then it is limited to half duplex. > -----Original Message----- > From: mlh [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 11, 2002 10:56 AM > To: [EMAIL PROTECTED] > Subject: full-duplex Ethernet cable? [7:31643] > > > Hi, there, > > > how many pairs of two-twisted cable are used for full-duplex > Ethernet ? what > is the > difference between full- and half- duplex cable? > > Thank you in advance. > > > > Regrads, > > mlh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31682&t=31643 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]