This just came up with a client that has a bunch or remote sites... all NAT and coming into the same remote box. This link helped a little.
http://www.cisco.com/warp/public/707/same-ip.html hth ipguru "Ali, Abbas" wrote: > I have a 525 PIX and running normal configuration. Inside network is in > 10.0.0.0/16 segment and doing NAT with public address. Here is the > situation. I have a client where I need to have an access through my PIX > with VPN. The client is using VPN Concentrator and also has 10.0.0.0/16 for > their inside network. They sent me the VPN Client CD that I installed in my > laptop and gained access to their network through outside segment meaning I > attached my PC between my PIX's E0 and Internet router in otherwords > bypassed PIX and configured my PC with public address. > > Is it possible to connect to their network with me being attached to my > Internal network. The question is since both the networks mine and theirs > are on the same LAN Segment how is it possible? > > Thanks, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31993&t=31294 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]