There are modules with multiple serial ports that allow the aggregate bandwidth to be applied to a single interface. I believe that the NM-4T= is one of them. Problem is that it won't work in a 2600. Let's use a phrase well known on this list "What is the problem you're trying to solve?" What is providing the 8Mbs input? For example - Several years ago we connected offices with multiple T-1s. We aggregated those into one circuit with Inverse multiplexors from Digital Link. The DL boxes handed off as HSSI. A Cisco box that would support HSSI was expensive. Larscom makes a box called an EtherSpan than converts HSSI to Ethernet. Adding that allowed us to use a 2514 at the Branch Office. Since then better solutions may have appeared. IIRC Cisco allows load sharing across multiple links. Maybe two WIC-2Ts in the 2600 would work.
> -----Original Message----- > From: suaveguru [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 18, 2002 9:28 AM > To: [EMAIL PROTECTED] > Subject: RE: wic 1T [7:32133] > > > anyone knows what WIC should I use on a 26xxx if I > want it to support 8mbps knowing that WIC-1T only > support up to 2mbps > --- Stefan Dozier wrote: > > Actually the WIC-1T can be used in asynchronous mode > > on the > > 1600 and 1700 series platforms! > > > > The command you're looking for is "physical-layer > > async" > > > > In all other platforms, it operates in sychronous > > mode "only". > > > > Stefan > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of > > Daniel Cotts > > Sent: Wednesday, January 16, 2002 12:29 PM > > To: [EMAIL PROTECTED] > > Subject: RE: wic 1T [7:32133] > > > > > > The WIC-1T is synchronous only. > > http://www.cisco.com/warp/public/107/hw_1t_wic.shtml > > > > If you want a WIC card that supports asynchronous > > serial then a WIC-2A/S > > would do. > > http://www.cisco.com/warp/public/107/wic-2as.shtml > > > > You mention modem support. Is your aux port free? If > > so, any reason why it > > won't meet your needs? > > > > > -----Original Message----- > > > From: D'Wayne Saunders > > [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, January 16, 2002 9:42 AM > > > To: [EMAIL PROTECTED] > > > Subject: wic 1T [7:32133] > > > > > > > > > Hi all > > > i have been searching on the cisco site for some > > > information relating to > > > WIC1T. I have just installed one into a 1720 for a > > modem > > > connection now by > > > cisco (or the information i can find ) the 1720 > > with this > > > module supports > > > both aysnc and sync's modes. > > > now my question is do i have to do anything > > special to get it > > > to work in > > > async mode . > > > by the way my ios is 12.0(3)T > > > > > > any help appreciated > > > > > > > > > D'Wayne Saunders, > > > Network Administrator > > > > > > Ph:08 89507742 > > > Fax:08 89521112 > > > Mobile: 0419 823 568 > > > > > > www.lasseters.com.au > > > > > > World's First Government Licensed and Regulated > > Online Casino... > > > > > > ************************************************************** > > > > > > ************************************************************* > > > > > > This email message (and attachments) may contain > > information that is > > > confidential to Lasseters Online. If > > > you are not the intended recipient you cannot use, > > distribute > > > or copy the > > > message or attachments. In such > > > a case, please notify the sender by return email > > immediately > > > and erase all > > > copies of the message and > > > attachments. Opinions, conclusions and other > > information in > > > this message > > > and attachments that do not > > > relate to the official business of Lasseters > > Online are > > > neither given nor > > > endorsed by it. > > > > > > ************************************************************** > > > > > > ************************************************************* > [EMAIL PROTECTED] > > > __________________________________________________ > Do You Yahoo!? > Send FREE video emails in Yahoo! Mail! > http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32493&t=32133 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]