This trick does not always work, a phone call is indeed sometimes necessary.
Brian On Mon, 21 Jan 2002, [EMAIL PROTECTED] wrote: > I would have thought that this would only work if your provider also used > Cisco LMI type?? > > Apart from the other suggestions, you could always ask your provider. Try > asking whoever you deal with for support, rather than whoever you deal > with for ordering - the support mob will hopefully check what is > provisioned, while the ordering mob may just check what you ordered. > Your provider may have some reporting system in place for customers that > you can use to check - you may be able to get other reports as well. Maybe > not, but it doesn't hurt to ask. > > JMcL > ----- Forwarded by Jenny Mcleod/NSO/CSDA on 22/01/2002 11:47 am ----- > > > "MADMAN" > Sent by: [EMAIL PROTECTED] > 22/01/2002 10:13 am > Please respond to "MADMAN" > > > To: [EMAIL PROTECTED] > cc: > Subject: Re: CIR [7:32747] > > > leave the default Cisco lmi type and it's provided by via LMI full > status update: > > C7206#sh frame-relay map > Serial5/0.18 (up): point-to-point dlci, dlci 18(0x12,0x420), broadcast, > BW = 102 > 4000 > status defined, active > Serial5/0.19 (up): point-to-point dlci, dlci 19(0x13,0x430), broadcast, > BW = 768 > 000 > status defined, active > Serial5/0.16 (up): point-to-point dlci, dlci 16(0x10,0x400), broadcast, > BW = 102 > 4000 > status defined, active > Serial5/0.17 (up): point-to-point dlci, dlci 17(0x11,0x410), broadcast, > BW = 102 > 4000 > status defined, active > Serial5/1.24 (up): point-to-point dlci, dlci 24(0x18,0x480), broadcast, > BW = 768 > 000 > status defined, active > Serial5/1.29 (up): point-to-point dlci, dlci 29(0x1D,0x4D0), broadcast, > BW = 102 > 4000 > status defined, active > Serial5/1.21 (up): point-to-point dlci, dlci 21(0x15,0x450), broadcast, > BW = 768 > 000 > status defined, active > > Joaquim Lopes wrote: > > > > How can i check if the cir that i'm paying is what my provider its > > delivering? > > thanks > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32773&t=32747 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]