thanks , one more question won't the aggregate of 8T1s make up 8mbps as well and if that is the case than can a WIC-2T able to support 8mbps?
regards, suaveguru --- "Woods, Randall, SOBUS" wrote: > Here is a possible config to achieve 8mbps for a > frame-relay connection. > > ISP Frame > Switch-----DL3800-----8xT1-----DL3800-----2600 > w/WIC-2T > > The WIC-2T would be installed in NM-1FE1R2W, > NM-1FE2W, or NM-2FE2W and no > other WIC modules > installed. I don't know if using the Digital Link > 3800's is cheaper than the > DS3 ATM cards but > this is one option. > > Woody > > -----Original Message----- > From: suaveguru [mailto:[EMAIL PROTECTED]] > Sent: Sunday, January 20, 2002 10:22 AM > To: [EMAIL PROTECTED] > Subject: cisco 26xxx to run 8mbps [7:32628] > > > hi all > > thanks for all the comments and tips given by some > of > you guys . It seems like a 26xxx cannot cater for > 8mbps traffic . If this is so what is the min cisco > router that supports 8mbps and what interface this > router will need? > > > thanks > > suaveguru > > __________________________________________________ > Do You Yahoo!? > Send FREE video emails in Yahoo! Mail! > http://promo.yahoo.com/videomail/ [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32783&t=32628 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]