I have a router in my main office which is connected to four different locations through full T1 for each location.
For example, Router A: Main office router Router B: Branch B Router C: Branch C Router D: Branch D Router E: Branch E All the branch routers are also connected through Frame-Relay Cloud in a full mesh topology and each has a bandwidth of 384KB. I am running EIGRP Network. In EIGRP routing, it always installs the route based on the bandwidth regardless of hop counts. The problem here I see that the router in branch E has installed a route to Branch B through Frame-Relay Cloud instead of picking up the better bandwidth link which is T1 to Main Office and then again T1 to the Branch E. But instead it installed the route through Frame-Relay cloud which is directly connected to Branch E as it is a full mesh network. Can someone shed some lights on it? Regards, AA Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33102&t=33102 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
