The branch router is 2600 with built in T1 module. My configurtion is: routere(config)int s0/0 service-module T1 timeslots 1-6 speed 64 along with linecode and framing just to let you know. I did not specifically assign bandwidth parameter at the interface level. I assumed that that the timeslot configuration should be able to take care of a Serial link bandwidth which defaults to T1 1.544M and change it to 384. But looks like the default serial link bandwidth takes precedence regardless of timeslots configuration unless I manually specify the bandwidth 384 command on physical serial link itself. Correct me if I am wrong.
Regards, AA -----Original Message----- From: Steven A. Ridder [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 24, 2002 11:06 AM To: [EMAIL PROTECTED] Subject: Re: Router is not installing the better route [7:33102] what does the bandwidth on the interface to the FR cloud say it is, T1 or384? Is the real T1 link to the site even a FS? -- RFC 1149 Compliant. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33106&t=33102 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
