Hi.. I tried to establish a ISDN-BRI connection between the two routers, one in Singapore and one in Jakarta. In Singapore we are using switch type basic-net3 and our ISDN card in singapore router is with S/T interface connected to NT1 and Jakarta side , the switch type is basic-5ess and the ISDN card with U interface. But we can't establish connection. We confirmed the ISDN line is working? May I know what is wrong with my configuration? What could be the problem?
SIN03#sh int bri6/1 BRI6/1 is up, line protocol is up (spoofing) Hardware is BRI Description: *** Reserved for BKK02 (BKK main office) - This no. is +65 888888 (Singtel )*** Internet address is 50.100.200.113/30 MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set Last input 1d17h, output never, output hang never Last clearing of "show interface" counters 1d20h Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/16 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 30 second input rate 0 bits/sec, 0 packets/sec 30 second output rate 0 bits/sec, 0 packets/sec 37 packets input, 249 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 37 packets output, 336 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 1 carrier transitions SIN03#sh isdn status ISDN BRI6/1 interface dsl 41, interface ISDN Switchtype = basic-net3 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 1, SAPI = 0, State = TEI_ASSIGNED I_Queue_Len 0, UI_Queue_Len 0 Layer 3 Status: 0 Active Layer 3 Call(s) Activated dsl 41 CCBs = 0 The Free Channel Mask: 0x80000003 SIN03>sh dialer map Static dialer map ip 50.100.200.114 name TEST01 (00162 21 777777) on BR6/1 &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& BKK02#sh int bri0 BRI0 is up, line protocol is up (spoofing) Hardware is PQUICC BRI with U interface Description: *** To SIN03 int bri 6/1 - This no. is +62 21 777777 *** Internet address is 50.100.200.114/29 MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set Last input 21:04:49, output never, output hang never Last clearing of "show interface" counters 1d21h Input queue: 0/75/132/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/16 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 30 second input rate 0 bits/sec, 0 packets/sec 30 second output rate 0 bits/sec, 0 packets/sec 1118 packets input, 10362 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 132 input errors, 132 CRC, 0 frame, 0 overrun, 0 ignored, 66 abort 543 packets output, 1629 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out 59 carrier transitions BKK02#sh isdn status Global ISDN Switchtype = basic-5ess ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-5ess Layer 1 Status: DEACTIVATED Layer 2 Status: TEI = 96, Ces = 1, SAPI = 0, State = TEI_ASSIGNED I_Queue_Len 0, UI_Queue_Len 0 Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 0 CCBs = 0 The Free Channel Mask: 0x80000003 Total Allocated ISDN CCBs = 0 BKK02>sh dialer map Static dialer map ip 50.100.200.113 name TEST01 (00165 888888) on BR0 ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33177&t=33177 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]