On R2 the biggest thing that hits me is that in your "sh isdn stat" your layer one is deactivated. Heres a link that might help you!
http://www.cisco.com/warp/public/129/bri-layer1.html#first Sim, CT (Chee Tong) wrote: > > Hi.. I tried to establish a ISDN-BRI connection between the > two routers, > one in Singapore and one in Jakarta. In Singapore we are using > switch type > basic-net3 and our ISDN card in singapore router is with S/T > interface > connected to NT1 and Jakarta side , the switch type is > basic-5ess and the > ISDN card with U interface. But we can't establish > connection. We > confirmed the ISDN line is working? May I know what is wrong > with my > configuration? What could be the problem? > > SIN03#sh int bri6/1 > BRI6/1 is up, line protocol is up (spoofing) > Hardware is BRI > Description: *** Reserved for BKK02 (BKK main office) - This > no. is +65 > 888888 (Singtel > )*** > Internet address is 50.100.200.113/30 > MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation PPP, loopback not set > Last input 1d17h, output never, output hang never > Last clearing of "show interface" counters 1d20h > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output > drops: 2 > Queueing strategy: weighted fair > Output queue: 0/1000/64/0 (size/max total/threshold/drops) > Conversations 0/1/16 (active/max active/max total) > Reserved Conversations 0/0 (allocated/max allocated) > 30 second input rate 0 bits/sec, 0 packets/sec > 30 second output rate 0 bits/sec, 0 packets/sec > 37 packets input, 249 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 > abort > 37 packets output, 336 bytes, 0 underruns > 0 output errors, 0 collisions, 1 interface resets > 0 output buffer failures, 0 output buffers swapped out > 1 carrier transitions > SIN03#sh isdn status > ISDN BRI6/1 interface > dsl 41, interface ISDN Switchtype = basic-net3 > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 64, Ces = 1, SAPI = 0, State = TEI_ASSIGNED > I_Queue_Len 0, UI_Queue_Len 0 > Layer 3 Status: > 0 Active Layer 3 Call(s) > Activated dsl 41 CCBs = 0 > The Free Channel Mask: 0x80000003 > > SIN03>sh dialer map > Static dialer map ip 50.100.200.114 name TEST01 (00162 21 > 777777) on BR6/1 > > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > > BKK02#sh int bri0 > BRI0 is up, line protocol is up (spoofing) > Hardware is PQUICC BRI with U interface > Description: *** To SIN03 int bri 6/1 - This no. is +62 21 > 777777 *** > Internet address is 50.100.200.114/29 > MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation PPP, loopback not set > Last input 21:04:49, output never, output hang never > Last clearing of "show interface" counters 1d21h > Input queue: 0/75/132/0 (size/max/drops/flushes); Total > output drops: 0 > Queueing strategy: weighted fair > Output queue: 0/1000/64/0 (size/max total/threshold/drops) > Conversations 0/1/16 (active/max active/max total) > Reserved Conversations 0/0 (allocated/max allocated) > 30 second input rate 0 bits/sec, 0 packets/sec > 30 second output rate 0 bits/sec, 0 packets/sec > 1118 packets input, 10362 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles > 132 input errors, 132 CRC, 0 frame, 0 overrun, 0 ignored, > 66 abort > 543 packets output, 1629 bytes, 0 underruns > 0 output errors, 0 collisions, 3 interface resets > 0 output buffer failures, 0 output buffers swapped out > 59 carrier transitions > > BKK02#sh isdn status > Global ISDN Switchtype = basic-5ess > ISDN BRI0 interface > dsl 0, interface ISDN Switchtype = basic-5ess > Layer 1 Status: > DEACTIVATED > Layer 2 Status: > TEI = 96, Ces = 1, SAPI = 0, State = TEI_ASSIGNED > I_Queue_Len 0, UI_Queue_Len 0 > Layer 3 Status: > 0 Active Layer 3 Call(s) > Active dsl 0 CCBs = 0 > The Free Channel Mask: 0x80000003 > Total Allocated ISDN CCBs = 0 > > BKK02>sh dialer map > Static dialer map ip 50.100.200.113 name TEST01 (00165 888888) > on BR0 > > > > > > > > > ================================================================== > De informatie opgenomen in dit bericht kan vertrouwelijk zijn > en > is uitsluitend bestemd voor de geadresseerde. Indien u dit > bericht > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken > en > de afzender direct te informeren door het bericht te > retourneren. > ================================================================== > The information contained in this message may be confidential > and is intended to be exclusively for the addressee. Should you > receive this message unintentionally, please do not use the > contents > herein and notify the sender immediately by return e-mail. > > > ================================================================== > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33192&t=33177 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]