Hi..  Below is configuration of my jakarta router.  my IOS version is
12.1(4).  Now, I can dial into Jakarta router BKK02 from Singaoire & can see
the call come in but the line won't stay up - however I have not been able
to dial out from BKK02. 
any idea?
!
interface BRI0
 description *** To SIN03 int bri 6/1 - This no. is +62 888888 ***
 ip address 57.192.243.114 255.255.255.248
 encapsulation ppp
 load-interval 30
 dialer map ip 57.192.243.113 name SIN03 broadcast 0016777777
 dialer-group 1
 isdn switch-type basic-5ess
 ppp authentication chap

BKK02#sh isdn stat
Global ISDN Switchtype = basic-5ess
ISDN BRI0 interface
        dsl 0, interface ISDN Switchtype = basic-5ess
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 80, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask:  0x80000003
    Total Allocated ISDN CCBs = 0

!
BKK02#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1(4), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 30-Aug-00 08:36 by cmong
Image text-base: 0x80008088, data-base: 0x805D8590

ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)

BKK02 uptime is 2 days, 13 hours, 25 minutes
System returned to ROM by reload at 14:22:24 UTC Fri Jan 25 2002
System restarted at 14:22:57 UTC Fri Jan 25 2002
System image file is "flash:c1700-y-mz.121-4.bin"

cisco 1720 (MPC860) processor (revision 0x301) with 12288K/4096K bytes of
memory.
Processor board ID JAD0401027Z (3139204005), with hardware revision 0000
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


                               

-----Original Message-----
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 25, 2002 11:08 PM
To: [EMAIL PROTECTED]; Sim, CT (Chee Tong)
Subject: Re: can't establish the ISDN connection [7:33177]


First off, SIN03 is ACTIVE but it's stuck in TEI_ASSIGNED.  To be
honest, if you have the correct switch type configured I'm not sure what
that means.  BKK02 doesn't even have layer 1 active so you have
additional problems there as it can't even talk to the ISDN switch. 
Check your physical connections there.  How did you confirm the ISDN
line is working?

Also, what IOS are these routers using?  There are some versions of IOS
with a LOT of ISDN-related bugs.

John

>>> "Sim, CT (Chee Tong)"  1/25/02
2:34:48 AM >>>
Hi..  I tried to establish a ISDN-BRI connection between the two
routers,
one in Singapore and one in Jakarta. In Singapore we are using switch
type
basic-net3 and our ISDN card in singapore router is with  S/T
interface
connected to NT1 and Jakarta side , the switch type is basic-5ess and
the
ISDN card with U interface.  But we can't establish connection.    We
confirmed the ISDN line is working?  May I know what is wrong with my
configuration?  What could be the problem?

SIN03#sh int bri6/1
BRI6/1 is up, line protocol is up (spoofing)
  Hardware is BRI
  Description: *** Reserved for BKK02 (BKK main office) - This no. is
+65
888888 (Singtel
)***
  Internet address is 50.100.200.113/30
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Last input 1d17h, output never, output hang never
  Last clearing of "show interface" counters 1d20h
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops:
2
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/1/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  30 second input rate 0 bits/sec, 0 packets/sec
  30 second output rate 0 bits/sec, 0 packets/sec
     37 packets input, 249 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     37 packets output, 336 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 output buffer failures, 0 output buffers swapped out
     1 carrier transitions
SIN03#sh isdn status
ISDN BRI6/1 interface
        dsl 41, interface ISDN Switchtype = basic-net3
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 64, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
        I_Queue_Len 0, UI_Queue_Len 0
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Activated dsl 41 CCBs = 0
    The Free Channel Mask:  0x80000003

SIN03>sh dialer map
Static dialer map ip 50.100.200.114 name TEST01 (00162 21 777777) on
BR6/1

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

BKK02#sh int bri0
BRI0 is up, line protocol is up (spoofing)
  Hardware is PQUICC BRI with U interface
  Description: *** To SIN03 int bri 6/1 - This no. is +62 21 777777
***
  Internet address is 50.100.200.114/29
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Last input 21:04:49, output never, output hang never
  Last clearing of "show interface" counters 1d21h
  Input queue: 0/75/132/0 (size/max/drops/flushes); Total output drops:
0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/1/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  30 second input rate 0 bits/sec, 0 packets/sec
  30 second output rate 0 bits/sec, 0 packets/sec
     1118 packets input, 10362 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     132 input errors, 132 CRC, 0 frame, 0 overrun, 0 ignored, 66
abort
     543 packets output, 1629 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 output buffer failures, 0 output buffers swapped out
     59 carrier transitions

BKK02#sh isdn status
Global ISDN Switchtype = basic-5ess
ISDN BRI0 interface
        dsl 0, interface ISDN Switchtype = basic-5ess
    Layer 1 Status:
        DEACTIVATED
    Layer 2 Status:
        TEI = 96, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
        I_Queue_Len 0, UI_Queue_Len 0
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask:  0x80000003
    Total Allocated ISDN CCBs = 0

BKK02>sh dialer map
Static dialer map ip 50.100.200.113 name TEST01 (00165 888888) on BR0








==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en 
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht 
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en 
de afzender direct te informeren door het bericht te retourneren. 
==================================================================
The information contained in this message may be confidential 
and is intended to be exclusively for the addressee. Should you 
receive this message unintentionally, please do not use the contents 
herein and notify the sender immediately by return e-mail.


==================================================================
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en 
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht 
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en 
de afzender direct te informeren door het bericht te retourneren. 
==================================================================
The information contained in this message may be confidential 
and is intended to be exclusively for the addressee. Should you 
receive this message unintentionally, please do not use the contents 
herein and notify the sender immediately by return e-mail.


==================================================================

[GroupStudy.com removed an attachment of type application/ms-tnef]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33404&t=33177
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to