What about "modem autoconfigure type discovery" syntax may be wrong but you get the idea.
G'luck. Tim -----Original Message----- From: Vincent Miller [mailto:[EMAIL PROTECTED]] Sent: Monday, January 28, 2002 1:15 PM To: [EMAIL PROTECTED] Subject: aux port issue [7:33466] I am trying to guide a customer through an aux port setup. so far, we have the following in the router: line aux 0 password cisco login modem InOut transport input all speed 115200 flowcontrol hardware HOwever,when anyone calls the dial to number, the modem answers, but nothing appears on the screen except a blinking cursor. The terminal session shows a status of connected. I believe the attached modem is a USR 56k v.34 capable. Any suggestions would be greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33477&t=33466 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
