Vincent, What do the settings look like for the modem that dials in?
Try adding this to the line aux0 config: stopbits 1 Rohm At 01:15 PM 1/28/2002 -0500, you wrote: >I am trying to guide a customer through an aux port setup. >so far, we have the following in the router: >line aux 0 > password cisco > login > modem InOut > transport input all > speed 115200 > flowcontrol hardware >HOwever,when anyone calls the dial to number, the modem answers, >but nothing appears on the screen except a blinking cursor. The >terminal session shows a status of connected. >I believe the attached modem is a USR 56k v.34 capable. >Any suggestions would be greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33483&t=33466 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]