It may not be a good idea to turn everything off with "no logg cons". You may want to limit the message rate or severity levels. Try:
"logg rate cons 10 all except crit" or "logg cons 3" -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Stuart Laubstein Sent: Wednesday, January 30, 2002 12:12 AM To: [EMAIL PROTECTED] Subject: term no mon command [7:33658] I have a 3620 and I have to work on the console port but I am swamped with messages every few seconds as people try to log in via the pri. I used the term no mon command but it doesnt work--I still get connect messages etc. Does anyone have an idea where these message come from and how I can shut them off. We are using 12.0(7) XK1 Early Deployment release. thanks stuart Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33713&t=33658 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]