Did anybody notice that the default is now "no logging console". I'm sure logging to console used to be on as default, but I was working on a 3660 the other day with 12.1(5)T10, config from scratch and logging console was off. Is this across the board?
Gaz ""Andy Hoang"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > It may not be a good idea to turn everything off with "no logg cons". You > may want to limit the message rate or severity levels. Try: > > "logg rate cons 10 all except crit" or "logg cons 3" > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Stuart Laubstein > Sent: Wednesday, January 30, 2002 12:12 AM > To: [EMAIL PROTECTED] > Subject: term no mon command [7:33658] > > > I have a 3620 and I have to work on the console port but I am swamped with > messages every few seconds as people try to log in via the pri. I used the > term no mon command but it doesnt work--I still get connect messages etc. > Does anyone have an idea where these message come from and how I can shut > them off. We are using 12.0(7) XK1 Early Deployment release. > > thanks > > stuart Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34140&t=33658 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
