hello, I have a question:
I'm setting up a simulation lab for my CCNA. I have 2 routers, Cisco2501, 2503. I'm setting up frame-relay on both of the serial one but for some reason, the 2 routers don't talk. I tried to encap ppp but here is an error message. I know i need a DTE and a DCE for frame to work. Thanks, Serial1 is up, line protocol is down Hardware is HD64570 Internet address is 200.0.0.2/24 MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 9488, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 14232, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:08, output 00:00:08, output hang never Last clearing of "show interface" counters 1d02h Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14232 packets input, 186598 bytes, 0 no buffer Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34864&t=34864 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]