Try TeraTerm. Very versatile. The break key is Alt+B. http://download.cnet.com/downloads/1,10150,0-10001-103-0-1-7,00.html?tag=src h&qt=tera+term&cn=&ca=10001
After you break into rommon, change the config-reg to 0x2142 (confreg 0x2142) >confreg 0x2142 >reset - System will reload and bypass startup-config Copy start run and remove your AAA configs Change your config-reg back to 0x2102 wr m -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Farooq Ali Sent: Tuesday, February 12, 2002 12:10 PM To: [EMAIL PROTECTED] Subject: Tacacs Problem: Router Lockout [7:35223] Hi All: I would appreciate if some one can help me in the right direction: scenario: Trying to install Tacacs on a Win2k server, copied the config for the NAS from the install window of TACACS. It has the command to TACACS all lines, vtys,con,aux,telnet. Then the TACACS install is not complete and now cannot log into the router. Telnet, Aux and con all require Username and Password. Read the documentation and found out that authorization should have been only on PPP or vty lines, not console, so a 3600 router sits locked up. Its a non production test router . Any ideas on how to reset the router.... Have tried the password Recovery procedure, but not sure , if am able to send the correct" break" signal, but trying to do the "break" signal isnt working. Has anyone done this before....Thanks in advance. -- _______________________________________________ Win a ski trip! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35260&t=35223 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
