Some platfors support it on 10M ethernet with the right IOS: C2611A#conf t Enter configuration commands, one per line. End with CNTL/Z. C2611A(config)#inter e0/1.1 C2611A(config-subif)#enc C2611A(config-subif)#encapsulation ? dot1Q IEEE 802.1Q Virtual LAN sde IEEE 802.10 Virtual LAN - Secure Data Exchange
Dave "Schneider, Matt" wrote: > > In the book that I read it says that you can only use fast ethernet or gig > ethernet > > -----Original Message----- > From: Colin [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, February 12, 2002 8:20 PM > To: [EMAIL PROTECTED] > Subject: Ethernet or FastEthernet [7:35245] > > Hello > > I have been doing some reading on VLANs and Trunking and have read > conflicting information. Can you use a 10Mbs Ethernet interface when > running ISL or 801.1q or does the interface have to be FastEthernet? > Some books/articles I've read say you must use at least a FastEthernet > interface and others say you can use an Ethernet interface. Note: this > is for my CCNP lab studies, not a production network. > > Thanks > Colin -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35300&t=35245 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]