Hi I don't think the NP-6E is supported on the 4000-M... only the 4500 and 4700.
Paul ""Gragg Vaill"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I admit to being stuck, I have inherited a 4000M that is blank (no IOS) > and for the life of me I cannot figure out how to get the IOS loaded on > it. The console port is a DB-25 and I do not have a working Ethernet > card for it. I do have a couple np-4t cards though. Speaking of Ethernet > cards for this model, I have a couple np-6e cards that give the > following error on boot up "%nim-2-badnimid: BAD NIM ID". I'm guessing > that means the cards are bad (boy am I glad that they were part of the > inheritance!) and if they aren't, what does the error mean and how would > on go about fixing it? Thanks in advance for your time, I do greatly > appreciate it. > > Gragg Vaill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35700&t=35689 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]