Note The six-port Ethernet module is supported on all Cisco 4000 series routers except the Cisco 4000 and Cisco 4000-M. From: (watch the wrap) http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis4000/4000c n/1000npm.htm#xtocid2938922
Check the GroupStudy archives. I seem to remember that someone put the 4000 Flash in a 2500 and loaded the image that way. Then moved the flash back to the 4000. > -----Original Message----- > From: Gragg Vaill [mailto:[EMAIL PROTECTED]] > Sent: Sunday, February 17, 2002 7:45 PM > To: [EMAIL PROTECTED] > Subject: Loading IOS on a 4000M [7:35689] > > > I admit to being stuck, I have inherited a 4000M that is > blank (no IOS) > and for the life of me I cannot figure out how to get the IOS > loaded on > it. The console port is a DB-25 and I do not have a working Ethernet > card for it. I do have a couple np-4t cards though. Speaking > of Ethernet > cards for this model, I have a couple np-6e cards that give the > following error on boot up "%nim-2-badnimid: BAD NIM ID". I'm guessing > that means the cards are bad (boy am I glad that they were part of the > inheritance!) and if they aren't, what does the error mean > and how would > on go about fixing it? Thanks in advance for your time, I do greatly > appreciate it. > > Gragg Vaill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35709&t=35689 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]