according to the information in the link, this feature is supported only on the 12000 series. Anyone checked to see if the feature has been migrated down to other platforms as newer IOS's are released?
""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > You want to get fancy you can try multilink frame relay: > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 limit/120s/120s17/17s_mfr.htm > > Then again if you want it simple and to work do what Patrick aluded > to, enable CEF and on the interface choose your favorite switching > mechanism, per packet or per destination. > > Dave > > Patrick Ramsey wrote: > > > > well you wouldn't really "bind" them...but, if you were using a routing > > protocol such as ospf, then it could round robin packets for you. > > > > -Patrick > > > > >>> beth 02/19/02 10:34AM >>> > > I have several 256k frame relay circuits some coming back to same host > > circuit > > my question is , is there anyway to way to bind a couple of these on a > router > > to increase bandwidth to 512k?? > > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any files > transmitted with it may contain confidential and > > /or proprietary information in the possession of WellStar Health System, > > Inc. ("WellStar") and is intended only for the individual or entity to whom > > addressed. This email may contain information that is held to be > > privileged, confidential and exempt from disclosure under applicable law. > If > > the reader of this message is not the intended recipient, you are hereby > > notified that any unauthorized access, dissemination, distribution or > > copying of any information from this email is strictly prohibited, and may > > subject you to criminal and/or civil liability. If you have received this > > email in error, please notify the sender by reply email and then delete > this > > email and its attachments from your computer. Thank you. > > > > ================================================================ > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35966&t=35854 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]