this news will surely disappoint the woman who posted the question. If memory serves,she works for a company that probably does not have 12xxx's in their lineup
Chuck ""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Yes I have since you pointed that out. Know what it means to > ASSume!! It is a 12000 series only feature at this point. > > Dave > > Chuck wrote: > > > > according to the information in the link, this feature is supported only on > > the 12000 series. Anyone checked to see if the feature has been migrated > > down to other platforms as newer IOS's are released? > > > > ""MADMAN"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > You want to get fancy you can try multilink frame relay: > > > > > > > > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 > > limit/120s/120s17/17s_mfr.htm > > > > > > Then again if you want it simple and to work do what Patrick aluded > > > to, enable CEF and on the interface choose your favorite switching > > > mechanism, per packet or per destination. > > > > > > Dave > > > > > > Patrick Ramsey wrote: > > > > > > > > well you wouldn't really "bind" them...but, if you were using a routing > > > > protocol such as ospf, then it could round robin packets for you. > > > > > > > > -Patrick > > > > > > > > >>> beth 02/19/02 10:34AM >>> > > > > I have several 256k frame relay circuits some coming back to same host > > > > circuit > > > > my question is , is there anyway to way to bind a couple of these on a > > > router > > > > to increase bandwidth to 512k?? > > > > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any files > > > transmitted with it may contain confidential and > > > > /or proprietary information in the possession of WellStar Health > System, > > > > Inc. ("WellStar") and is intended only for the individual or entity to > > whom > > > > addressed. This email may contain information that is held to be > > > > privileged, confidential and exempt from disclosure under applicable > > law. > > > If > > > > the reader of this message is not the intended recipient, you are > hereby > > > > notified that any unauthorized access, dissemination, distribution or > > > > copying of any information from this email is strictly prohibited, and > > may > > > > subject you to criminal and/or civil liability. If you have received > > this > > > > email in error, please notify the sender by reply email and then delete > > > this > > > > email and its attachments from your computer. Thank you. > > > > > > > > ================================================================ > > > -- > > > David Madland > > > Sr. Network Engineer > > > CCIE# 2016 > > > Qwest Communications Int. Inc. > > > [EMAIL PROTECTED] > > > 612-664-3367 > > > > > > "Emotion should reflect reason not guide it" > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36034&t=35854 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
