I don't think you can set the ToS bits on a switch. You can only set the CoS bit and the CoS will not be translated to a ToS on router unless you force it to in the configuration. ToS is a layer 3 function and CoS is a layer 2 function
>From: "TP" >Reply-To: "TP" >To: [EMAIL PROTECTED] >Subject: read and not write TOS [7:36946] >Date: Fri, 1 Mar 2002 06:14:30 -0500 > >Dear group, >i have the following situation: >a "special" switch connected to a cisco router via ethernet interface. >This switch is enable to set TOS based on its ports. >I'd like to configure the router in order to have different queuing based >on >the TOS (two or three queues). >The router should read (and NOT write) the TOS and priorituze the traffic >with the higher TOS: is it possible? If yes, maybe with access-list or >samething different, can you provide the proper command lines? >Thanks in advance >Teresa _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36988&t=36946 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]